View PC4SD11NTZBF_2081971.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

pc4sd11ntz series features v drm : 800v non-zero cross type dip 6pin phototriac coupler for triggering 1. high repetitive peak off-state voltage (v drm : 800v) 2. non-zero crossing functionality 3. i ft ranks available (see model line-up section in this datasheet) 4. 6 pin dip package 5. lead-free components are also available (see model line-up section in this datasheet) 6. double transfer mold construction (ideal for flow soldering) 7. high isolation voltage between input and output (v iso (rms) : 5.0kv) ? zero cross type is also available. ( pc4sd21ntz series ) description pc4sd11ntz series phototriac coupler include an infrared emitting diode (ired) optically coupled to an output phototriac. these devices feature full wave control and are ideal isolated drivers for medium to high current triacs. dip package provides 5.0kv isolation from input to output with superior commutative noise immunity. 1 notice the content of data sheet is subject to change without prior notice. in the absence of confirmation by device specification sheets, sharp takes no responsibility for any defects that may occur in equipment using any sharp devices shown in catalogs, data books, etc. contact sharp in order to obtain the latest device specification sheets before usin g any sharp device. pc4sd11ntz series sheet no.: d2-a07801en date mar. 31. 2004 ?sharp corporation agency approvals/compliance 1. triggering for triacs used to switch on and off devices which require ac loads. for example heaters, fans, motors, solenoids, and valves. 2. triggering for triacs used for implementing phase control in applications such as lighting control and temperature control (hvac). 3. ac line control in power supply applications. applications 1. recognized by ul1577 (double protection isolation), file no. e64380 (as model no. 4sd11 ) 2. approved by csa, file no. ca95323 (as model no. 4sd11 ) 3. optionary available vde approved ( ? ) (din en 60747- 5-2), file no. 40008189 (as model no. 4sd11 ) 4. package resin : ul flammability grade (94v-0) ( ? ) din en60747-5-2 : succesor standard of din vde0884. up to date code "rd" (december 2003), approval of din vde0884. from date code "s1" (january 2004), approval of din en60747-5-2. ( ?? ) reinforced insulation type is also available. ( pc4sf11yvz series )
internal connection diagram 1 6 4 1 3 5 2 2 3 4 5 6 anode cathode nc anode/cathode no external connection cathode/anode 2 outline dimensions (unit : mm) 1. through-hole [ex. pc4sd11ntz ] 2. wide through-hole lead-form [ex. pc4sd11nvz ] 3. smt gullwing lead-form [ex. pc4sd11nxp ] 4. wide smt gullwing lead-form [ex. pc4sd11nwp ] 7.12 0.5 : 0 to 13? 7.62 0.3 epoxy resin 6.5 0.5 0.6 0.2 1.2 0.3 1 2 3 6 5 4 0.5 typ. 2.9 0.5 0.5 0.1 2.54 0.25 3.25 0.5 3.5 0.5 4sd11 sharp mark "s" date code (2 digit) rank mark model no. factory identification mark anode mark 6.5 0.5 0.6 0.2 1.2 0.3 1 2 3 6 5 4 4sd11 sharp mark "s" date code (2 digit) rank mark model no. factory identification mark anode mark 7.62 0.3 epoxy resin 0.26 0.1 10.16 0.5 2.7 min. 7.12 0.5 0.5 typ. 2.9 0.5 0.5 0.1 2.54 0.25 3.25 0.5 3.5 0.5 7.12 0.5 7.62 0.3 epoxy resin 6.5 0.5 0.6 0.2 1.2 0.3 2.54 0.25 3.5 0.5 0.35 0.25 1.0 + 0.4 ? 0 1.0 + 0.4 ? 0 10.0 + 0 ? 0.5 0.26 0.1 1 2 3 6 5 4 4sd11 sharp mark "s" date code (2 digit) rank mark model no. factory identification mark anode mark 7.62 0.3 0.26 0.1 0.75 0.25 0.75 0.25 12.0 max. 10.16 0.5 0.25 0.25 epoxy resin 6.5 0.5 0.6 0.2 1.2 0.3 7.12 0.5 2.54 0.25 3.5 0.5 1 2 3 6 5 4 4sd11 sharp mark "s" date code (2 digit) rank mark model no. factory identification mark anode mark pc4sd11ntz series sheet no.: d2-a07801en product mass : approx. 0.35g product mass : approx. 0.35g product mass : approx. 0.33g product mass : approx. 0.34g
3 outline dimensions ? pin is not allowed external connection (unit : mm) 5. through-hole vde option [ex. pc4sd11ytz ] 6. wide through-hole lead-form vde option [ex. pc4sd11yvz ] 7. smt gullwing lead-form vde option [ex. pc4sd11yxp ] 8. wide smt gullwing lead-form vde option [ex. pc4sd11ywp ] 7.12 0.5 : 0 to 13? 7.62 0.3 epoxy resin 6.5 0.5 0.6 0.2 1.2 0.3 1 2 3 6 5 4 0.5 typ. 2.9 0.5 0.5 0.1 2.54 0.25 3.25 0.5 3.5 0.5 4 4sd11 sharp mark "s" date code (2 digit) rank mark model no. factory identification mark vde identification mark anode mark 6.5 0.5 0.6 0.2 1.2 0.3 1 2 3 6 5 4 7.62 0.3 epoxy resin 0.26 0.1 10.16 0.5 2.7 min. 7.12 0.5 0.5 typ. 2.9 0.5 0.5 0.1 2.54 0.25 3.25 0.5 3.5 0.5 4 4sd11 sharp mark "s" date code (2 digit) rank mark model no. factory identification mark vde identification mark anode mark 7.12 0.5 7.62 0.3 epoxy resin 6.5 0.5 0.6 0.2 1.2 0.3 2.54 0.25 3.5 0.5 0.35 0.25 1.0 + 0.4 ? 0 1.0 + 0.4 ? 0 10.0 + 0 ? 0.5 0.26 0.1 1 2 3 6 5 4 4 4sd11 sharp mark "s" date code (2 digit) rank mark model no. factory identification mark vde identification mark anode mark 7.62 0.3 0.26 0.1 0.75 0.25 0.75 0.25 12.0 max. 10.16 0.5 0.25 0.25 epoxy resin 6.5 0.5 0.6 0.2 1.2 0.3 7.12 0.5 2.54 0.25 3.5 0.5 1 2 3 6 5 4 4 4sd11 sharp mark "s" date code (2 digit) rank mark model no. factory identification mark vde identification mark anode mark pc4sd11ntz series sheet no.: d2-a07801en 5 product mass : approx. 0.35g product mass : approx. 0.35g product mass : approx. 0.33g product mass : approx. 0.34g
date code (2 digit) rank mark refer to the model line-up table a.d. 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 mark a b c d e f h j k l m n mark p r s t u v w x a b c mark 1 2 3 4 5 6 7 8 9 o n d month january february march april may june july august september october november december a.d 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2nd digit month of production 1st digit year of production factory identification mark factory identification mark no mark country of origin japan indonesia philippines china * this factory marking is for identification purpose only. please contact the local sharp sales representative to see the actural status of the production. 4 repeats in a 20 year cycle pc4sd11ntz series sheet no.: d2-a07801en
electro-optical characteristics parameter symbol unit input output (t a = 25?c) forward voltage reverse current repentitive peak off-state current on-state voltage holding current critical rate of rise of off-state voltage minimum trigger current isolation resistance turn-on time v f i r i drm v t i h dv/dt i ft r iso t on v a a v ma v/ s ma ? s i f = 20ma v r = 3v v d = v drm i t = 0.1a v d = 6v v d = 1/ ? 2 ? drm v d = 6v, r l = 100 ? dc500v,40 to 60%rh v d = 6v, r l = 100 ? , i f = 20ma conditions min. typ. max. transfer charac- teristics rank b rank c ? ? ? ? 0.1 50 ? ? 5 10 10 ? 1.2 ? ? ? ? ? ? ? 10 11 ? 1.4 10 3 2.5 3.5 ? 7 5 ? 100 absolute maximum ratings parameter symbol rating unit (t a = 25?c) *2 *1 i f v r i t (rms) i surge v drm v iso (rms) t opr t stg t sol ma v a a v kv ?c ?c ?c *3 *4 50 6 0.1 1.2 800 5.0 ? 3 0 to + 100 ? 55 to + 125 270 *1 40 to 60%rh, ac for 1minute, f = 60hz *2 for 10s *3 f = 50hz sine wave *4 lead solder plating models: 260?c forward current reverse voltage rms on-state current peak one cycle surge current repetitive peak off-state voltage isolation voltage operating temperature storage temperature soldering temperature input output 5 pc4sd11ntz series 1mm soldering area sheet no.: d2-a07801en
lead form shipping package din en60747-5-2 model no. through-hole pc4sd11ntzcf - max.5 max.7 sleeve 50pcs/sleeve pc4sd11ytzcf approved smt gullwing pc4sd11nxzcf - pc4sd11yxzcf approved wide through-hole pc4sd11nvzcf - pc4sd11yvzcf PC4SD11NTZBF pc4sd11ytzbf pc4sd11nxzbf pc4sd11yxzbf pc4sd11nvzbf pc4sd11yvzbf approved c b i ft [ma] (v d = 6v, r l = 100 ? ) rank mark 6 please contact a local sharp sales representative to inquire about production status. pc4sd11ntz series sheet no.: d2-a07801en model line-up (1) (lead-free components) model line-up (2) (lead solder plating components) lead form shipping package din en60747-5-2 model no. through-hole pc4sd11ntzc - max.5 max.7 sleeve 50pcs/sleeve pc4sd11ytzc approved smt gullwing pc4sd11nxzc - pc4sd11yxzc approved wide through-hole pc4sd11nvzc - pc4sd11yvzc pc4sd11ntzb pc4sd11ytzb pc4sd11nxzb pc4sd11yxzb pc4sd11nvzb pc4sd11yvzb approved c b i ft [ma] (v d = 6v, r l = 100 ? ) rank mark lead form shipping package din en60747-5-2 model no. wide smt gullwing pc4sd11nwzc - max.5 max.7 taping 1 000pcs/reel sleeve 50pcs/sleeve pc4sd11ywzc approved smt gullwing pc4sd11nxpc - pc4sd11yxpc approved wide smt gullwing pc4sd11nwpc - pc4sd11ywpc pc4sd11nwzb pc4sd11ywzb pc4sd11nxpb pc4sd11yxpb pc4sd11nwpb pc4sd11ywpb approved c b i ft [ma] (v d = 6v, r l = 100 ? ) rank mark lead form shipping package din en60747-5-2 model no. wide smt gullwing pc4sd11nwzcf - max.5 max.7 taping 1 000pcs/reel sleeve 50pcs/sleeve pc4sd11ywzcf approved smt gullwing pc4sd11nxpcf - pc4sd11yxpcf approved wide smt gullwing pc4sd11nwpcf - pc4sd11ywpcf pc4sd11nwzbf pc4sd11ywzbf pc4sd11nxpbf pc4sd11yxpbf pc4sd11nwpbf pc4sd11ywpbf approved c b i ft [ma] (v d = 6v, r l = 100 ? ) rank mark
7 pc4sd11ntz series 0 10 20 30 40 50 60 70 forward current i f (ma) ambient temperature t a (?c) ? 30 0 50 100 fig.1 forward current vs. ambient temperature fig.2 rms on-state current vs. ambient temperature sheet no.: d2-a07801en 0 25 50 75 100 125 150 175 ? 30 0 50 100 rms on-state current i r (rms) (ma) ambient temperature t a (?c) 1 5 10 0.9 1.1 1 1.2 1.3 1.4 1.5 50 100 forward current i f (ma) forward voltage v f (v) t a =75?c 50?c 25?c 0?c ? 25?c fig.3 forward current vs. forward voltage fig.4 minimum trigger current vs. ambient temperature minimum trigger current i ft (ma) 0 10 9 ? 40 ? 20 0 20 4 06080100 8 7 6 5 4 3 2 1 ambient temperature t (?c) v d = 6v r l = 100 ? fig.6 on-state voltage vs. ambient temperature 1 1.8 1.9 1.5 1.6 1.7 1.3 1.4 2 ? 40 0 ? 20 20 40 60 80 100 on-state voltage v t (v) ambient temperature t a (?c) i t = 100ma 1.1 1.2 fig.5 relative repetitive peak off-state voltage vs. ambient temperature 1.3 0.8 1 0.9 1.2 1.1 0.7 100 ? 20 0 20 60 80 40 ? 40 ambient temperature t a (?c) relative repetitive peak off-state voltage v drm (t j = t a )/v drm (t j = 25?c)
8 pc4sd11ntz series fig.9 turn-on time vs. forward current sheet no.: d2-a07801en 10 ? 5 10 ? 7 10 ? 8 10 ? 6 10 ? 9 120 ? 20 0 20 60 80 100 40 v d = 800v ? 40 ambient temperature t a (?c) repetitive peak off-state current i drm (a) remarks : please be aware that all data in the graph are just for reference. fig.8 repetitive peak off-state current vs. ambient temperature 10 100 1 000 110 100 turn-on time t on ( s) forward current i f (ma) v d = 6v r l = 100 ? fig.7 holding current vs. ambient temperature 0.1 1 10 holding current i h (ma) ambient temperature t a (?c) v d = 6v ? 40 ? 20 0 20 4 06080100
recommended foot print (reference) 9 smt gullwing lead-form wide smt gullwing lead-form 2.54 2.54 1.7 2.2 10.2 2.54 2.54 1.7 2.2 8.2 (unit : mm) pc4sd11ntz series design considerations in order for the phototriac to turn off, the triggering current (i f ) must be 0.1ma or less. please refrain from using these devices in a direct drive configuration. these phototriac coupler are intended to be used as triggering device for main triacs. please ensure that the output rating of these devices will be sufficient for triggering the main output triac of your choice. failure to do may result in malfunctions. in phase control applications or where the phototriac coupler is being by a pulse signal, please ensure that the pulse width is a minimum of 1ms. for designs that will experience excessive noise or sudden changes in load voltage, please include an appropriate snubber circuit as shown in the below circuit. please keep in mind that sharp phototriac couplers incorporate superor dv/dt ratings which can often eliminate the need for a snubber circuit. degradation in general, the emission of the ired used in phototriac couplers will degrade over time. in the case where long term operation and / or constant extreme temperature fluctuations will be applied to the devices, please allow for a worst case scenario of 50% degradation over 5years. therefore in order to maintain proper operation, a design implementing these phototriac couplers should provide at least twice the minimum required triggering current from initial operation. design guide sheet no.: d2-a07801en
10 pc4sd11ntz series sheet no.: d2-a07801en ? for additional design assistance, please review our corresponding optoelectronic application notes. standard circuit (medium/high power triac drive circuit) ac line triac load pc4sd11ntz note) please add the snubber circuit according to a condition. any snubber or varistor used for the above mentioned scenarios should be located as close to the main output triac as possible. 6 4 1 2 5 3
manufacturing guidelines reflow soldering: reflow soldering should follow the temperature profile shown below. soldering should not exceed the curve of temperature profile and time. please don't solder more than twice. soldering method flow soldering : due to sharp's double transfer mold construction submersion in flow solder bath is allowed under the below listed guidelines. flow soldering should be completed below 270?c and within 10s. preheating is within the bounds of 100 to 150?c and 30 to 80s. please don't solder more than twice. hand soldering hand soldering should be completed within 3s when the point of solder iron is below 400?c. please don't solder more than twice. other notices please test the soldering method in actual condition and make sure the soldering works fine, since the impact on the junction between the device and pcb varies depending on the tooling and soldering conditions. 11 1234 300 200 100 0 0 (?c) terminal : 260?c peak ( package surface : 250?c peak) preheat 150 to 180?c, 120s or less reflow 220?c or more, 60s or less (min) pc4sd11ntz series sheet no.: d2-a07801en
12 pc4sd11ntz series sheet no.: d2-a07801en solvent cleaning : solvent temperature should be 45?c or below. immersion time should be 3minutes or less. ultrasonic cleaning : the impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time, size of pcb and mounting method of the device. therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of mass production. recommended solvent materials : ethyl alcohol, methyl alcohol and isopropyl alcohol. in case the other type of solvent materials are intended to be used, please make sure they work fine in actual using conditions since some materials may erode the packaging resin. cleaning instructions this product shall not contain the following materials. and they are not used in the production process for this device. regulation substances : cfcs, halon, carbon tetrachloride, 1.1.1-trichloroethane (methylchloroform) specific brominated flame retardants such as the pbbos and pbbs are not used in this product at all. presence of odc
package specification 13 12.0 6.7 5.8 10.8 15.0 6.35 5.9 10.8 520 2 520 2 sleeve package 1. through-hole or smt gullwing package materials sleeve : hips (with anti-static material) stopper : styrene-elastomer package method max. 50pcs of products shall be packaged in a sleeve. both ends shall be closed by tabbed and tabless stoppers. the product shall be arranged in the sleeve with its anode mark on the tabless stopper side. max. 20 sleeves in one case. sleeve outline dimensions (unit : mm) (unit : mm) 2. wide through-hole or wide smt gullwing package materials sleeve : hips (with anti-static material) stopper : styrene-elastomer package method max. 50pcs of products shall be packaged in a sleeve. both ends shall be closed by tabbed and tabless stoppers. the product shall be arranged in the sleeve with its anode mark on the tabless stopper side. max. 20 sleeves in one case. sleeve outline dimensions pc4sd11ntz series sheet no.: d2-a07801en
14 tape and reel package 1. smt gullwing package materials carrier tape : a-pet (with anti-static material) cover tape : pet (three layer system) reel : ps carrier tape structure and dimensions f k e i d j b h h a c g 5? max. dimensions list (unit:mm) a 16.0 0.3 b 7.5 0.1 c 1.75 0.1 d 12.0 0.1 e 2.0 0.1 h 10.4 0.1 i 0.4 0.05 j 4.2 0.1 k 7.8 0.1 f 4.0 0.1 g 1.5 + 0.1 ? 0 a c e g f b d dimensions list (unit : mm) a 330 b 17.5 1.5 c 100 1.0 d 13 0.5 e 23 1.0 f 2.0 0.5 g 2.0 0.5 pull-out direction [packing : 1 000pcs/reel] reel structure and dimensions direction of product insertion pc4sd11ntz series sheet no.: d2-a07801en
2. wide smt gullwing package materials carrier tape : a-pet (with anti-static material) cover tape : pet (three layer system) reel : ps carrier tape structure and dimensions 15 dimensions list a 24.0 0.3 b 11.5 0.1 c 1.75 0.1 d 12.0 0.1 e 2.0 0.1 h 12.2 0.1 i 0.4 0.05 j 4.15 0.1 k 7.6 0.1 f 4.0 0.1 g 1.5 + 0.1 ? 0 (unit : mm) j g i e c b a h h 5? max. f d k a c e g f b d dimensions list (unit : mm) a 330 b 25.5 1.5 c 100 1.0 d 13 0.5 e 23 1.0 f 2.0 0.5 g 2.0 0.5 pull-out direction [packing : 1 000pcs/reel] reel structure and dimensions direction of product insertion pc4sd11ntz series sheet no.: d2-a07801en
?the circuit application examples in this publication are provided to explain representative applications of sharp devices and are not intended to guarantee any circuit design or license any intellectual property rights. sharp takes no responsibility for any problems rela- ted to any intellectual property right of a third party re- sulting from the use of sharp's devices. ?contact sharp in order to obtain the latest device specification sheets before using any sharp device. sharp reserves the right to make changes in the spec- ifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. manufac- turing locations are also subject to change without no- tice. ?observe the following points when using any devices in this publication. sharp takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) the devices in this publication are designed for use in general electronic equipment designs such as: --- personal computers --- office automation equipment --- telecommunication equipment [terminal] --- test and measurement equipment --- industrial control --- audio visual equipment --- consumer electronics (ii) measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when sharp devices are used for or in connection with equipment that requires higher reliability such as: - -- transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- traffic signals --- gas leakage sensor breakers --- alarm equipment --- various safety devices, etc. (iii) sharp devices shall not be used for or in connec- tion with equipment that requires an extremely high lev- el of reliability and safety such as: --- space applications --- telecommunication equipment [trunk lines] --- nuclear power control equipment - -- medical and other life support equipment (e.g., scuba). ?if the sharp devices listed in this publication fall with- in the scope of strategic products described in the for- eign exchange and foreign trade law of japan, it is necessary to obtain approval to export such sharp de- vices. ?this publication is the proprietary product of sharp and is copyrighted, with all rights reserved. under the copyright laws, no part of this publication may be repro- duced or transmitted in any form or by any means, elec- tronic or mechanical, for any purpose, in whole or in part, without the express written permission of sharp. express written permission is also required before any use of this publication may be made by a third party. ?contact and consult with a sharp representative if there are any questions about the contents of this pub- lication. 16 important notices pc4sd11ntz series sheet no.: d2-a07801en

▲Up To Search▲

Price & Availability of PC4SD11NTZBF

	To Download PC4SD11NTZBF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .